{"title":"BMW G20 \/ G21 3 Series","description":"\u003cp\u003ePerformance and appearance parts that fit the 2019–2024 BMW 3 Series (G20 sedan, G21 touring), including 330i, 330e and M340i.\u003c\/p\u003e","products":[{"product_id":"gloss-black-front-lip-splitter-bmw-g20-g21","title":"BMW G20 3 Series Front Lip Splitter, Gloss Black — 330i \/ M340i (2019–2022)","description":"\u003cp\u003eA three-piece gloss black front lip for the G20 3 Series. It sits under the factory bumper and drops the front end visually without touching the bodywork — the cheapest way to change how the car reads from the front.\u003c\/p\u003e\n\n\u003ch3\u003eHow it looks on the car\u003c\/h3\u003e\n\u003cp\u003eThe factory G20 bumper ends high and flat. This lip carries the line down and forward, so the nose looks lower and wider without actually lowering anything. Gloss black ties in with Shadowline trim, black kidney grilles and black wheels — if your car already has any of those, this is the piece that makes the front end look finished instead of half done.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiving with it:\u003c\/strong\u003e it hangs below the bumper, so take steep driveways, speed bumps and parking blocks at an angle. Treat it like any lip — careful, not scared.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series \u003cstrong\u003eG20, G21 and G28, 2019 to 2022\u003c\/strong\u003e. Made for bumpers \u003cstrong\u003ewith fog light cut-outs\u003c\/strong\u003e — check yours before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e The G20 changed bumpers partway through the run and the M Sport and Sport Line front ends are different shapes, so this is worth the five minutes.\u003c\/p\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThree-piece front lip kit — centre section and two side extensions\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eABS plastic, gloss black finish\u003c\/li\u003e\n\u003cli\u003eMounts with screws and adhesive to the underside of the factory bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo cutting or modification required\u003c\/strong\u003e — this one is a genuine bolt-on, unlike most lip kits\u003c\/li\u003e\n\u003cli\u003eSix month warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWorth knowing before you buy\u003c\/h3\u003e\n\u003cp\u003eThis is \u003cstrong\u003eABS plastic, not carbon fiber\u003c\/strong\u003e. Gloss black ABS looks the part and costs a fraction of carbon, but it is a painted-finish plastic — it will scuff if you scrape a steep driveway, and it is not the same material as our carbon parts. If you want carbon for this car, ask us and we'll quote it.\u003c\/p\u003e\n\u003cp\u003eFitting takes most people an afternoon with a friend. Clean the bumper properly before the adhesive goes on, and do it somewhere warm — adhesive that goes on cold lets go later.\u003c\/p\u003e\n\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping, held in stock in the United States — expect delivery in 1–2 weeks.\u003c\/strong\u003e No customs wait and nothing to pay at the door. You get a tracking number by email the moment it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only\u003c\/strong\u003e, including Alaska and Hawaii. We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once the lip has been fitted or the adhesive broken we cannot take it back, which is why the free VIN check above matters. If it arrives damaged — and gloss black shows every mark — photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"Plastic \/ Front Bumper \/ Black","offer_id":44050544394302,"sku":"KMA-G20-FLS-GB","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g20-front-lip-1_3ea95a19-8f54-48c8-8323-61549ff4f70b.jpg?v=1790269811"},{"product_id":"bmw-m340i-m440i-m240i-b58-cold-air-intake","title":"BMW M340i \/ M440i \/ M240i B58 Cold Air Intake with Heat Shield — 4\" Aluminum 2019+","description":"\u003cp\u003eA 4-inch aluminum cold air intake for the B58 in the M340i, M440i and M240i. It replaces the factory airbox with a high-flow filter sealed inside an insulated heat shield, so the filter draws cooler air instead of engine-bay heat. Bracketry holds everything still under load, so nothing rattles when the engine torques over. Expect more intake and turbo sound than stock.\u003c\/p\u003e\n\u003ch3\u003eHow it sounds and feels\u003c\/h3\u003e\n\u003cp\u003eWith the factory airbox gone, you \u003cstrong\u003ehear the turbo\u003c\/strong\u003e. Roll into the throttle and there's a deep intake whoosh as the B58 breathes in, then the turbo spooling up as boost builds — sound that the stock box was built to muffle.\u003c\/p\u003e\n\u003cp\u003eAt a steady cruise it stays quiet, so it isn't tiring on long drives. It changes what you hear under the hood — it does not change your exhaust note.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e on a stock tune, an intake by itself gives small gains. Where it pays off is cooler air feeding the turbo on hot days and back-to-back pulls, the sound every time you accelerate, and the headroom it gives you when you add a tune later.\u003c\/p\u003e\n\u003ch3\u003eHow it looks under the hood\u003c\/h3\u003e\n\u003cp\u003eThe black textured heat shield and aluminum pipe replace a plastic box with something that looks like it belongs on a performance car — with the Kings Mods Auto crown on the shield.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M340i — G20 and G21, 2019+\u003c\/li\u003e\n\u003cli\u003eBMW M440i — G22 and G23, \u003c\/li\u003e\n\u003cli\u003eBMW M240i — G42, 2022+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eB58 3.0L six-cylinder only.\u003c\/strong\u003e It does not fit the four-cylinder 330i, 430i or 230i.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4\" high-flow air filter\u003c\/li\u003e\n\u003cli\u003e4\" aluminum intake pipe\u003c\/li\u003e\n\u003cli\u003eInsulated heat shield with edge trim\u003c\/li\u003e\n\u003cli\u003eSilicone coupler and stainless clamps\u003c\/li\u003e\n\u003cli\u003eBillet SAI breather adapter with bracket and breather filter\u003c\/li\u003e\n\u003cli\u003eBrackets and all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum intake pipe, 4\" diameter\u003c\/li\u003e\n\u003cli\u003eEnclosed, insulated heat shield in a black textured finish\u003c\/li\u003e\n\u003cli\u003eAnti-rattle bracketry\u003c\/li\u003e\n\u003cli\u003eKings Mods Auto branded\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eIt replaces the factory airbox using the brackets and hardware in the box. Most people who work on their own car can fit it at home with hand tools.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock at our manufacturer. Delivery is about 2 to 3 weeks.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot CARB-certified. Not legal for sale or use in California on pollution-controlled motor vehicles.\u003c\/em\u003e\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"B58 3.0L","offer_id":50544589471806,"sku":"200329261:-1#B58 3.0L","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kings-b58-intake-1.jpg?v=1790657892"},{"product_id":"bmw-b58-gen2-aluminum-turbo-inlet-m340i-m440i-m240i-supra","title":"BMW M340i \/ M440i \/ M240i \u0026 Toyota Supra B58 Aluminum Turbo Inlet Pipe — Gen 2 (2020+)","description":"\u003cp\u003eAn aluminum turbo inlet pipe for the B58 Gen 2 in the BMW M340i, M440i, M240i and the Toyota GR Supra 3.0. It replaces the factory inlet pipe — the bend that carries air from your intake into the turbo — with a high-flow aluminum part in a gloss black finish, with the breather port welded in place.\u003c\/p\u003e\n\u003ch3\u003eWhy change it\u003c\/h3\u003e\n\u003cp\u003eThe inlet is the last section of pipe before the turbo. Swapping the factory part for a smooth, high-flow aluminum one is a common next step after an intake, and it's the kind of part that holds up as you add a tune later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSound:\u003c\/strong\u003e most owners notice a little more turbo spool when they get on the throttle, especially paired with an intake. \u003cstrong\u003ePower:\u003c\/strong\u003e on its own, on a stock tune, expect small changes — it's a supporting mod, not a power adder by itself.\u003c\/p\u003e\n\u003cp\u003ePairs with our \u003ca href=\"\/products\/bmw-m340i-m440i-m240i-b58-cold-air-intake\"\u003eB58 cold air intake\u003c\/a\u003e for the M340i, M440i and M240i.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M340i — G20 and G21, 2020+\u003c\/li\u003e\n\u003cli\u003eBMW M440i — G22 and G23, 2021+\u003c\/li\u003e\n\u003cli\u003eBMW M240i — G42, 2022+\u003c\/li\u003e\n\u003cli\u003eToyota GR Supra 3.0 — A90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eB58 Gen 2 3.0L six-cylinder only.\u003c\/strong\u003e It does not fit four-cylinder models (330i, 430i, 230i, Supra 2.0) or older F-series B58 cars such as the F22 M240i or F30 340i.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum turbo inlet pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum construction\u003c\/li\u003e\n\u003cli\u003eGloss black finish\u003c\/li\u003e\n\u003cli\u003eWelded breather port\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory turbo inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eIt goes in where the factory inlet comes out. If you're comfortable taking your intake off, you can do this at home with hand tools; if not, any shop that works on BMWs or Supras can fit it quickly.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNormally in stock. Delivery is about 2 weeks.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot CARB-certified. Not legal for sale or use in California on pollution-controlled motor vehicles.\u003c\/em\u003e\u003c\/p\u003e","brand":"KingsModsAuto","offers":[{"title":"Aluminum","offer_id":67799870505022,"sku":"KMA-B58G2-TIP","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-b58-turbo-inlet-5.jpg?v=1790922268"},{"product_id":"bmw-g80-g82-g87-dry-carbon-mirror-caps","title":"BMW G80 M3 \/ G82 M4 \/ G87 M2 Dry Carbon Mirror Caps — M240i \/ M340i \/ M440i (LHD)","description":"\u003cp\u003eAutoclave dry carbon replacement mirror caps for BMW cars with the factory M-style mirrors: G87 M2, G80 M3, G82 \/ G83 M4, M240i, M340i and M440i. They take the place of the painted factory caps and give the car a full carbon mirror.\u003c\/p\u003e\n\u003ch3\u003eWhy dry carbon\u003c\/h3\u003e\n\u003cp\u003eDry carbon is pre-preg carbon fiber cured under heat and pressure in an autoclave. These caps are 3K twill pre-preg carbon with a gloss finish, sold as a left and right pair.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M2 — G87\u003c\/li\u003e\n\u003cli\u003eBMW M3 — G80\u003c\/li\u003e\n\u003cli\u003eBMW M4 — G82 coupe \/ G83 convertible\u003c\/li\u003e\n\u003cli\u003eBMW M240i — G42\u003c\/li\u003e\n\u003cli\u003eBMW M340i — G20, with factory M-style mirrors\u003c\/li\u003e\n\u003cli\u003eBMW M440i — G22 \/ G23, with factory M-style mirrors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeft-hand drive only.\u003c\/strong\u003e Your car must have the factory M-style mirror housing. Earlier M340i and M440i cars with the standard rounded mirrors will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft mirror cap\u003c\/li\u003e\n\u003cli\u003eRight mirror cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutoclave dry carbon\u003c\/li\u003e\n\u003cli\u003e3K twill pre-preg carbon fiber\u003c\/li\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eReplacement style: replaces the factory caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eThe factory caps come off and these go on in their place. If you'd rather not do it yourself, any shop that works on BMWs can fit them quickly.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery is 10–15 days.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n","brand":"KingsModsAuto","offers":[{"title":"Side Mirror Cover","offer_id":67877551112254,"sku":"200329261:-1#Side Mirror Cover","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g8x-dry-carbon-mirror-caps-1.jpg?v=1792209518"},{"product_id":"bmw-g20-g80-m4-style-dry-carbon-trunk-spoiler","title":"BMW G20 3 Series \/ G80 M3 M4-Style Dry Carbon Trunk Spoiler (2019+)","description":"\u003cp\u003eAn M4-style trunk spoiler in gloss dry carbon for the BMW G20 3 Series sedan and the G80 M3. It adds the raised, kicked-up lip from the M4 to the edge of your trunk lid.\u003c\/p\u003e\n\u003ch3\u003eWhy dry carbon\u003c\/h3\u003e\n\u003cp\u003eIt's made from pre-preg carbon fiber, pressed in a metal mold, with a 3K twill weave and a gloss finish.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series sedan — G20, 2019+ (330i, M340i and others)\u003c\/li\u003e\n\u003cli\u003eBMW M3 — G80, 2021+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSedan only.\u003c\/strong\u003e It does not fit the G21 Touring (wagon) or the G82 \/ G83 M4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTrunk spoiler\u003c\/li\u003e\n\u003cli\u003e3M double-sided tape, pre-applied or supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-preg dry carbon fiber\u003c\/li\u003e\n\u003cli\u003e3K twill weave\u003c\/li\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eAbout 128 cm long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eIt sticks on with 3M tape. No drilling. Clean the trunk lid with alcohol, test-fit it first, then press it down firmly. Fitting is easiest in warm weather, and the tape needs a day to fully bond before you wash the car.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery is 7–15 days.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n","brand":"KingsModsAuto","offers":[{"title":"128*9*34CM \/ Glossy","offer_id":67892873527358,"sku":"191284006:-2#128*9*34CM;191288010:-2#Glossy","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g20-g80-m4-style-spoiler-1.jpg?v=1792209617"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/collections\/kma3-8240297902142.jpg?v=1788158798","url":"https:\/\/www.kingsmodsauto.com\/collections\/bmw-g20-g21.oembed","provider":"KingsModsAuto","version":"1.0","type":"link"}