{"title":"Featured","description":"\u003cp\u003eThe parts we have in stock right now, ready to ship from the United States.\u003c\/p\u003e","products":[{"product_id":"axle-back-exhaust-bmw-f30-335i-f32-435i-2012-2016","title":"BMW 335i \/ 435i Axle-Back Exhaust with 4.25\" Carbon Tips — F30 \/ F32 N55, RWD (2012–2016)","description":"\u003cp\u003eA black chrome stainless axle-back for the F30 335i and F32 435i. It replaces the rear section behind the catalytic converter — the part that actually decides how your car sounds — and leaves everything forward of it factory.\u003c\/p\u003e\n\n\u003ch3\u003eHow it sounds\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCold start:\u003c\/strong\u003e a deeper, fuller bark than stock that settles into a low, even burble at idle. You'll notice it in the driveway, but it isn't the kind of loud that gets you glared at.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAround town:\u003c\/strong\u003e under light throttle it's a smoother, deeper version of the factory tone — more presence, same manners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhen you get on it:\u003c\/strong\u003e this is where it earns its money. Past about 3,000 rpm the N55's straight-six comes through clearly — a raspy, rising howl all the way to redline that the factory muffler mostly hides. Lift off and you may hear light burbles and pops on the stock tune; a tune adds more.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOn the highway:\u003c\/strong\u003e expect a mild hum at steady cruise around 2,000 rpm. Most owners find it easy to live with. If your commute is long and you want silence, a fixed, non-valved system isn't the right choice — ask us about alternatives.\u003c\/p\u003e\n\u003cp\u003eIt's the sound of the engine itself — no speakers, no piped-in noise. An axle-back is about sound and looks; on its own it won't add meaningful horsepower.\u003c\/p\u003e\n\u003ch3\u003eHow it looks\u003c\/h3\u003e\n\u003cp\u003eTwin 4.25\" carbon tips with a heat-blued inner lip fill the rear valance far better than the factory tips, and the black chrome piping stays dark instead of turning brown like bare steel.\u003c\/p\u003e\n\u003ch3\u003eRead this before you order\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a bolt-on.\u003c\/strong\u003e Installation requires cutting the factory exhaust at the factory break point. That is a job for a shop with a lift and a saw, not a driveway and jack stands, and it is not reversible — once the factory section is cut, putting the car back to stock means buying a new one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRear-wheel drive only. This does not fit xDrive or any AWD model.\u003c\/strong\u003e If your car is xDrive, this part will not work and we would rather tell you now than process your return later.\u003c\/p\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F30 335i — 2012 to 2015, rear-wheel drive only\u003c\/li\u003e\n\u003cli\u003eBMW F32 435i — 2014 to 2016, rear-wheel drive only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes. On this part it also confirms you are not xDrive, which is the single most common reason an exhaust like this comes back.\u003c\/p\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eY-pipe axle-back section, single inlet splitting to twin outlets\u003c\/li\u003e\n\u003cli\u003eTwo carbon fiber tips\u003c\/li\u003e\n\u003cli\u003eTwo stainless T-bolt clamps (60–63 mm)\u003c\/li\u003e\n\u003cli\u003eOne stainless sleeve coupler\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStainless steel construction, black chrome finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.25\" OD carbon fiber tips with a blue burnt stainless inner tip\u003c\/strong\u003e — the burnt blue lip is a heat-treated finish, not paint, so it doesn't fade or peel\u003c\/li\u003e\n\u003cli\u003e3.75\" OD inner steel tip\u003c\/li\u003e\n\u003cli\u003e3\" ID inlet piping\u003c\/li\u003e\n\u003cli\u003e2.25\" ID outlet piping\u003c\/li\u003e\n\u003cli\u003eFixed system — non-valved, so one volume setting and no quiet mode. Louder than stock at every rpm, and no flap motor to fail later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping, held in stock in the United States — expect delivery in 1–2 weeks.\u003c\/strong\u003e No customs wait and nothing to pay at the door. Tracking by email the moment it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only\u003c\/strong\u003e, including Alaska and Hawaii. We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days. Once it has been cut in or installed we cannot take it back, which is exactly why the free VIN check above is worth the five minutes. If it arrives damaged, send us photos within 7 days and we'll replace it or refund you in full — you ship nothing back.\u003c\/p\u003e\n\u003cp style=\"font-size:0.9em;opacity:0.75\"\u003eSold for off-road use only. Exhaust noise and emissions rules vary by state — if you're unsure what applies where you drive, ask us before you order.\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"Default Title","offer_id":44047809347646,"sku":"KMA-F3X-ABE-BK","price":419.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-f30-axleback-2_88ac6337-2893-4b32-a419-3793be998d79.jpg?v=1790269801"},{"product_id":"gloss-black-front-lip-splitter-bmw-g20-g21","title":"BMW G20 3 Series Front Lip Splitter, Gloss Black — 330i \/ M340i (2019–2022)","description":"\u003cp\u003eA three-piece gloss black front lip for the G20 3 Series. It sits under the factory bumper and drops the front end visually without touching the bodywork — the cheapest way to change how the car reads from the front.\u003c\/p\u003e\n\n\u003ch3\u003eHow it looks on the car\u003c\/h3\u003e\n\u003cp\u003eThe factory G20 bumper ends high and flat. This lip carries the line down and forward, so the nose looks lower and wider without actually lowering anything. Gloss black ties in with Shadowline trim, black kidney grilles and black wheels — if your car already has any of those, this is the piece that makes the front end look finished instead of half done.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLiving with it:\u003c\/strong\u003e it hangs below the bumper, so take steep driveways, speed bumps and parking blocks at an angle. Treat it like any lip — careful, not scared.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eBMW 3 Series \u003cstrong\u003eG20, G21 and G28, 2019 to 2022\u003c\/strong\u003e. Made for bumpers \u003cstrong\u003ewith fog light cut-outs\u003c\/strong\u003e — check yours before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e The G20 changed bumpers partway through the run and the M Sport and Sport Line front ends are different shapes, so this is worth the five minutes.\u003c\/p\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThree-piece front lip kit — centre section and two side extensions\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eABS plastic, gloss black finish\u003c\/li\u003e\n\u003cli\u003eMounts with screws and adhesive to the underside of the factory bumper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo cutting or modification required\u003c\/strong\u003e — this one is a genuine bolt-on, unlike most lip kits\u003c\/li\u003e\n\u003cli\u003eSix month warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWorth knowing before you buy\u003c\/h3\u003e\n\u003cp\u003eThis is \u003cstrong\u003eABS plastic, not carbon fiber\u003c\/strong\u003e. Gloss black ABS looks the part and costs a fraction of carbon, but it is a painted-finish plastic — it will scuff if you scrape a steep driveway, and it is not the same material as our carbon parts. If you want carbon for this car, ask us and we'll quote it.\u003c\/p\u003e\n\u003cp\u003eFitting takes most people an afternoon with a friend. Clean the bumper properly before the adhesive goes on, and do it somewhere warm — adhesive that goes on cold lets go later.\u003c\/p\u003e\n\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping, held in stock in the United States — expect delivery in 1–2 weeks.\u003c\/strong\u003e No customs wait and nothing to pay at the door. You get a tracking number by email the moment it ships.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only\u003c\/strong\u003e, including Alaska and Hawaii. We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once the lip has been fitted or the adhesive broken we cannot take it back, which is why the free VIN check above matters. If it arrives damaged — and gloss black shows every mark — photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"Plastic \/ Front Bumper \/ Black","offer_id":44050544394302,"sku":"KMA-G20-FLS-GB","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g20-front-lip-1_3ea95a19-8f54-48c8-8323-61549ff4f70b.jpg?v=1790269811"},{"product_id":"carbon-fiber-mirror-caps-audi-c8","title":"Audi A6 \/ S6 \/ A7 \/ S7 Carbon Fiber Mirror Caps — C8 Replacement Style (2019–2025)","description":"\u003cp\u003eReplacement carbon fiber mirror caps for the C8 platform. They swap the factory caps rather than sticking over them, so the shape stays correct and there is no lip to catch and peel later.\u003c\/p\u003e\n\n\u003ch3\u003eHow it looks on the car\u003c\/h3\u003e\n\u003cp\u003eMirror caps sit right at eye level, so they're the first thing people notice when they walk up to the car. The carbon weave picks up light and shifts as you move around it, and against the black optic trim or a dark paint colour it gives the C8 a factory-performance look — the kind of detail Audi Sport puts on its RS models. Because they replace the caps rather than covering them, the edges are clean and sit exactly where the factory ones did.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudi A6 and S6 — C8, 2019 to 2025\u003c\/li\u003e\n\u003cli\u003eAudi A7 and S7 — C8, 2019 to 2025\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCut for lane change assist.\u003c\/strong\u003e The blind spot sensor window is already there, so the system keeps working and you won't throw a fault. If your car does not have lane change assist, tell us before you order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft and right mirror cap — one matched pair\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber outer skin over an ABS base — the standard construction for this part at every price point\u003c\/li\u003e\n\u003cli\u003eGloss clear coat\u003c\/li\u003e\n\u003cli\u003eReplacement style, not a stick-on cover\u003c\/li\u003e\n\u003cli\u003eBlind spot sensor window cut from the factory\u003c\/li\u003e\n\u003cli\u003eOne year warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eThe factory cap unclips — no tools beyond a trim wedge, and most people have it done in twenty minutes a side. Work slowly in the cold; the clips are more brittle than they look.\u003c\/p\u003e\n\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFree shipping. Delivery is 7 to 10 working days.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only\u003c\/strong\u003e, including Alaska and Hawaii. We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a cap has been fitted we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"Default Title","offer_id":50519150624830,"sku":"KMA-C8-CFMC","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-c8-mirror-caps-1_03eff223-7f89-4816-994d-ea9849dafdd3.jpg?v=1790269819"},{"product_id":"carbon-fiber-vented-hood-bmw-g80-m3-g82-m4","title":"BMW M3 \/ M4 Carbon Fiber Vented Hood — G80 \/ G82 \/ G83 (2021–2024)","description":"\u003cp\u003eA twin-vent carbon fiber hood for the G80 M3 and G82\/G83 M4. It replaces the factory hood outright, and the two vents let heat out of the engine bay. From the front, nothing changes the look of the car as much.\u003c\/p\u003e\n\n\u003ch3\u003eWhat it changes\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe look:\u003c\/strong\u003e the twin vents and the carbon weave are visible from across a parking lot. Left bare, it's an unmistakable carbon statement. Painted to match, it's a subtle factory-plus look where only the vents give it away.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHeat:\u003c\/strong\u003e the S58 makes a lot of heat, and on a hard drive or a hot day it builds up under the hood. The vents give that heat somewhere to go, so the bay cools down faster after you park or come off the track.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 sedan: G80, 2021 to 2024, including Competition and xDrive\u003c\/li\u003e\n\u003cli\u003eBMW M4 coupe: G82, 2021 to 2024\u003c\/li\u003e\n\u003cli\u003eBMW M4 convertible: G83, 2021 to 2024\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e This matters more on a hood than on anything else we sell, because it's made for your order and can't be sent back once production starts. It's also the way to check a 2025 car.\u003c\/p\u003e\n\n\u003ch3\u003eWhy it takes about 55 days\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eEvery hood is made to order.\u003c\/strong\u003e The carbon is laid up by hand, cured, clear-coated and then inspected before it ships. Cutting any of those steps short is what leaves you with a wavy weave, dry spots or a clear coat that yellows, and that's the kind of hood we won't sell. \u003cstrong\u003eAllow about 55 days from order to delivery.\u003c\/strong\u003e We keep you updated along the way, and your tracking number arrives by email the moment it ships.\u003c\/p\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon fiber hood with mesh vent inserts\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWet-laid carbon fiber, single-sided. The weave you see is on the top surface. The underside is a reinforced structural frame and isn't show-finish carbon.\u003c\/li\u003e\n\u003cli\u003eGloss UV-resistant clear coat\u003c\/li\u003e\n\u003cli\u003eTwin heat-extraction vents with mesh inserts\u003c\/li\u003e\n\u003cli\u003eUses the factory hinges and latch\u003c\/li\u003e\n\u003cli\u003eCan be left as bare carbon or painted to match your car (see the green car in the photos)\u003c\/li\u003e\n\u003cli\u003eOne year warranty against manufacturing defects\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHave a body shop fit it.\u003c\/strong\u003e The factory hinges, latch and seals move over from your old hood, and the panel gaps are set by hand. Most shops take a couple of hours. Aftermarket carbon hoods often need small adjustments to line up perfectly, and that's normal, not a defect.\u003c\/p\u003e\n\u003cp\u003eWith vents, a little rain can reach the engine bay, just as it does on any vented hood. Don't point a pressure washer straight into the vents.\u003c\/p\u003e\n\n\u003ch3\u003eFreight delivery: please read\u003c\/h3\u003e\n\u003cp\u003eThis hood arrives by freight truck in a large box (about 64 × 60 × 8 in, 46 lb). The carrier calls ahead to book the delivery, and someone needs to be there to receive it. Freight damage claims have strict rules, so:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cstrong\u003eOpen and inspect the hood before the driver leaves.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecord a video as you open it\u003c\/strong\u003e, from the sealed box until the hood is fully unpacked.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eIf anything is damaged, write \"DAMAGED\" on the delivery receipt before you sign.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThen email us within 7 days with your order number, the video and a photo of the receipt. We'll replace it or refund you in full. Once a receipt is signed clean, the shipping insurance won't pay for damage found later. Full details are in our \u003ca href=\"\/policies\/shipping-policy\"\u003eShipping policy\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only\u003c\/strong\u003e, including Alaska and Hawaii. We can't deliver freight to PO boxes.\u003c\/p\u003e\n\u003cp\u003eBecause every hood is built for your order, it can't be cancelled after production starts, and it can't be returned if you change your mind. Damage in transit and manufacturing defects are always covered. That's why the free VIN check above is worth five minutes.\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"Single-Side","offer_id":50527744589886,"sku":"200329261:-2#Single-Side","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g80-m3-m4-carbon-hood-1.jpg?v=1790316777"},{"product_id":"bmw-m340i-m440i-m240i-b58-cold-air-intake","title":"BMW M340i \/ M440i \/ M240i B58 Cold Air Intake with Heat Shield — 4\" Aluminum 2019+","description":"\u003cp\u003eA 4-inch aluminum cold air intake for the B58 in the M340i, M440i and M240i. It replaces the factory airbox with a high-flow filter sealed inside an insulated heat shield, so the filter draws cooler air instead of engine-bay heat. Bracketry holds everything still under load, so nothing rattles when the engine torques over. Expect more intake and turbo sound than stock.\u003c\/p\u003e\n\u003ch3\u003eHow it sounds and feels\u003c\/h3\u003e\n\u003cp\u003eWith the factory airbox gone, you \u003cstrong\u003ehear the turbo\u003c\/strong\u003e. Roll into the throttle and there's a deep intake whoosh as the B58 breathes in, then the turbo spooling up as boost builds — sound that the stock box was built to muffle.\u003c\/p\u003e\n\u003cp\u003eAt a steady cruise it stays quiet, so it isn't tiring on long drives. It changes what you hear under the hood — it does not change your exhaust note.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e on a stock tune, an intake by itself gives small gains. Where it pays off is cooler air feeding the turbo on hot days and back-to-back pulls, the sound every time you accelerate, and the headroom it gives you when you add a tune later.\u003c\/p\u003e\n\u003ch3\u003eHow it looks under the hood\u003c\/h3\u003e\n\u003cp\u003eThe black textured heat shield and aluminum pipe replace a plastic box with something that looks like it belongs on a performance car — with the Kings Mods Auto crown on the shield.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M340i — G20 and G21, 2019+\u003c\/li\u003e\n\u003cli\u003eBMW M440i — G22 and G23, 2021+\u003c\/li\u003e\n\u003cli\u003eBMW M240i — G42, 2022+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eB58 3.0L six-cylinder only.\u003c\/strong\u003e It does not fit the four-cylinder 330i, 430i or 230i.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4\" high-flow air filter\u003c\/li\u003e\n\u003cli\u003e4\" aluminum intake pipe\u003c\/li\u003e\n\u003cli\u003eInsulated heat shield with edge trim\u003c\/li\u003e\n\u003cli\u003eSilicone coupler and stainless clamps\u003c\/li\u003e\n\u003cli\u003eBillet SAI breather adapter with bracket and breather filter\u003c\/li\u003e\n\u003cli\u003eBrackets and all mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum intake pipe, 4\" diameter\u003c\/li\u003e\n\u003cli\u003eEnclosed, insulated heat shield in a black textured finish\u003c\/li\u003e\n\u003cli\u003eAnti-rattle bracketry\u003c\/li\u003e\n\u003cli\u003eKings Mods Auto branded\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eIt replaces the factory airbox using the brackets and hardware in the box. Most people who work on their own car can fit it at home with hand tools.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock at our manufacturer. Delivery is about 2 to 3 weeks.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot CARB-certified. Not legal for sale or use in California on pollution-controlled motor vehicles.\u003c\/em\u003e\u003c\/p\u003e","brand":"Kings Mods Auto","offers":[{"title":"B58 3.0L","offer_id":50544589471806,"sku":"200329261:-1#B58 3.0L","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kings-b58-intake-1.jpg?v=1790657892"},{"product_id":"bmw-b58-gen2-aluminum-turbo-inlet-m340i-m440i-m240i-supra","title":"BMW M340i \/ M440i \/ M240i \u0026 Toyota Supra B58 Aluminum Turbo Inlet Pipe — Gen 2 (2020+)","description":"\u003cp\u003eAn aluminum turbo inlet pipe for the B58 Gen 2 in the BMW M340i, M440i, M240i and the Toyota GR Supra 3.0. It replaces the factory inlet pipe — the bend that carries air from your intake into the turbo — with a high-flow aluminum part in a gloss black finish, with the breather port welded in place.\u003c\/p\u003e\n\u003ch3\u003eWhy change it\u003c\/h3\u003e\n\u003cp\u003eThe inlet is the last section of pipe before the turbo. Swapping the factory part for a smooth, high-flow aluminum one is a common next step after an intake, and it's the kind of part that holds up as you add a tune later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSound:\u003c\/strong\u003e most owners notice a little more turbo spool when they get on the throttle, especially paired with an intake. \u003cstrong\u003ePower:\u003c\/strong\u003e on its own, on a stock tune, expect small changes — it's a supporting mod, not a power adder by itself.\u003c\/p\u003e\n\u003cp\u003ePairs with our \u003ca href=\"\/products\/bmw-m340i-m440i-m240i-b58-cold-air-intake\"\u003eB58 cold air intake\u003c\/a\u003e for the M340i, M440i and M240i.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M340i — G20 and G21, 2020+\u003c\/li\u003e\n\u003cli\u003eBMW M440i — G22 and G23, 2021+\u003c\/li\u003e\n\u003cli\u003eBMW M240i — G42, 2022+\u003c\/li\u003e\n\u003cli\u003eToyota GR Supra 3.0 — A90\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eB58 Gen 2 3.0L six-cylinder only.\u003c\/strong\u003e It does not fit four-cylinder models (330i, 430i, 230i, Supra 2.0) or older F-series B58 cars such as the F22 M240i or F30 340i.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum turbo inlet pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAluminum construction\u003c\/li\u003e\n\u003cli\u003eGloss black finish\u003c\/li\u003e\n\u003cli\u003eWelded breather port\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory turbo inlet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eIt goes in where the factory inlet comes out. If you're comfortable taking your intake off, you can do this at home with hand tools; if not, any shop that works on BMWs or Supras can fit it quickly.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNormally in stock. Delivery is about 2 weeks.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot CARB-certified. Not legal for sale or use in California on pollution-controlled motor vehicles.\u003c\/em\u003e\u003c\/p\u003e","brand":"KingsModsAuto","offers":[{"title":"Aluminum","offer_id":67799870505022,"sku":"KMA-B58G2-TIP","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-b58-turbo-inlet-5.jpg?v=1790922268"},{"product_id":"bmw-g80-g82-g87-dry-carbon-mirror-caps","title":"BMW G80 M3 \/ G82 M4 \/ G87 M2 Dry Carbon Mirror Caps — M240i \/ M340i \/ M440i (LHD)","description":"\u003cp\u003eAutoclave dry carbon replacement mirror caps for BMW cars with the factory M-style mirrors: G87 M2, G80 M3, G82 \/ G83 M4, M240i, M340i and M440i. They take the place of the painted factory caps and give the car a full carbon mirror.\u003c\/p\u003e\n\u003ch3\u003eWhy dry carbon\u003c\/h3\u003e\n\u003cp\u003eDry carbon is pre-preg carbon fiber cured under heat and pressure in an autoclave. These caps are 3K twill pre-preg carbon with a gloss finish, sold as a left and right pair.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M2 — G87\u003c\/li\u003e\n\u003cli\u003eBMW M3 — G80\u003c\/li\u003e\n\u003cli\u003eBMW M4 — G82 coupe \/ G83 convertible\u003c\/li\u003e\n\u003cli\u003eBMW M240i — G42\u003c\/li\u003e\n\u003cli\u003eBMW M340i — G20, with factory M-style mirrors\u003c\/li\u003e\n\u003cli\u003eBMW M440i — G22 \/ G23, with factory M-style mirrors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLeft-hand drive only.\u003c\/strong\u003e Your car must have the factory M-style mirror housing. Earlier M340i and M440i cars with the standard rounded mirrors will not fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLeft mirror cap\u003c\/li\u003e\n\u003cli\u003eRight mirror cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutoclave dry carbon\u003c\/li\u003e\n\u003cli\u003e3K twill pre-preg carbon fiber\u003c\/li\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eReplacement style: replaces the factory caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eThe factory caps come off and these go on in their place. If you'd rather not do it yourself, any shop that works on BMWs can fit them quickly.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery is 10–15 days.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n","brand":"KingsModsAuto","offers":[{"title":"Side Mirror Cover","offer_id":67877551112254,"sku":"200329261:-1#Side Mirror Cover","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g8x-dry-carbon-mirror-caps-1.jpg?v=1792209518"},{"product_id":"bmw-g20-g80-m4-style-dry-carbon-trunk-spoiler","title":"BMW G20 3 Series \/ G80 M3 M4-Style Dry Carbon Trunk Spoiler (2019+)","description":"\u003cp\u003eAn M4-style trunk spoiler in gloss dry carbon for the BMW G20 3 Series sedan and the G80 M3. It adds the raised, kicked-up lip from the M4 to the edge of your trunk lid.\u003c\/p\u003e\n\u003ch3\u003eWhy dry carbon\u003c\/h3\u003e\n\u003cp\u003eIt's made from pre-preg carbon fiber, pressed in a metal mold, with a 3K twill weave and a gloss finish.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBMW 3 Series sedan — G20, 2019+ (330i, M340i and others)\u003c\/li\u003e\n\u003cli\u003eBMW M3 — G80, 2021+\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSedan only.\u003c\/strong\u003e It does not fit the G21 Touring (wagon) or the G82 \/ G83 M4.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSend us your VIN before you order and we'll confirm it fits in writing, free.\u003c\/strong\u003e It takes us a few minutes and it is the single best way to avoid a return.\u003c\/p\u003e\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTrunk spoiler\u003c\/li\u003e\n\u003cli\u003e3M double-sided tape, pre-applied or supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePre-preg dry carbon fiber\u003c\/li\u003e\n\u003cli\u003e3K twill weave\u003c\/li\u003e\n\u003cli\u003eGloss finish\u003c\/li\u003e\n\u003cli\u003eAbout 128 cm long\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eIt sticks on with 3M tape. No drilling. Clean the trunk lid with alcohol, test-fit it first, then press it down firmly. Fitting is easiest in warm weather, and the tape needs a day to fully bond before you wash the car.\u003c\/p\u003e\n\u003ch3\u003eShipping and returns\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery is 7–15 days.\u003c\/strong\u003e You get a tracking number the moment it ships, and you can message us any time for an update.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe ship within the United States only.\u003c\/strong\u003e We don't ship internationally.\u003c\/p\u003e\n\u003cp\u003eUnopened parts can be returned within 30 days in their original packaging. Once a part has been installed we cannot take it back, which is why the free VIN check above matters. If it arrives damaged, photograph it before you do anything else, send us the photos within 7 days, and we'll replace it or refund you in full. You ship nothing back.\u003c\/p\u003e\n","brand":"KingsModsAuto","offers":[{"title":"128*9*34CM \/ Glossy","offer_id":67892873527358,"sku":"191284006:-2#128*9*34CM;191288010:-2#Glossy","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/9700\/2046\/files\/kma-g20-g80-m4-style-spoiler-1.jpg?v=1792209617"}],"url":"https:\/\/www.kingsmodsauto.com\/collections\/frontpage.oembed","provider":"KingsModsAuto","version":"1.0","type":"link"}